Erro ao executar qualquer sessão de baan.
No license to run object.
Cannot open Master security file.

Security error when executing any baan session.

Try to Validate tools set (in BaanV the session is ttiex3220m000).

Good luck

Luisa

There are 3 files that must be consistent within their versions:

$BSE/lib/install/tab.reg
$BSE/tools/tl7.6_a/itlbic/ibic___slm___0
$BSE/tools/tt7.6_a/ittbic/ibic___slm___0

If you made some change on your environment or copied from another one, you must recover the original file..

This is what "security file" means.

As it says "Cannot open", also check the permissions for these files.

Any G, you suggestion might not work for Luisa, as they are on 7.1 tools set (Baan 5.0c) and your solution is related to 7.6 tools (LN Version).

Luisa,

Refer to the thread - Invalid File Security (http://www.baanboard.com/baanboard/showthread.php?t=12809&highlight=security)

Were there any changes in the system which caused this issue?

This is a new Baan 5.0c installation, and support told to install Porting set 8.4c. So at this moment, i have all master cd instaled, SLM 7.1 instaled and configure but i don't have Security files yet, so the error.
When i try to install it, i get that error in tools section.

So the only chance i have, it is downgrade to porting set 7.1d.12a, install security files and then upgrade to porting set 8.4c.
What do you think?
:confused:

8.4c? That's one version behind the latest 8.4c01 part of the LN Unified Porting Set.

Refer to -

SolutionID 208194
CreatedBy Dieleman,Jacco
CreatedOn 2006-02-02
ModifiedBy Dieleman,Jacco
ModifiedOn 2006-04-14
VerifiedBy Dieleman,Jacco
VerifiedOn 2006-02-02

StatusDescription
Published TypeDescription
OT: Standard Functionality

Solution Description English Secutiry files for SSA Baan ERP 5.0c, package da
VERSION(S): 2.0_a

SITUATION DESCRIPTION:
Adoption of the SSA® License Manager by SSA® BaanERP 5.0c required amongst others the creation and release of a security file for package da.

SOLUTION DESCRIPTION:
Security file is created for SSA Baan ERP 5.0c and is included in the current solution number.

SolutionID 208077
CreatedBy Boot,Bram
CreatedOn 2006-01-30
ModifiedBy Boot,Bram
ModifiedOn 2006-11-07
VerifiedBy Boot,Bram
VerifiedOn 2006-04-14

StatusDescription
Published TypeDescription
QR: New Error Std. Software

Solution Description
English Secutiry files for SSA Baan ERP 5.0c
VERSION(S): B50_b, B50_c, B51_a

SITUATION IDENTIFIED IN: SSA Baan ERP 5.0c

SITUATION DESCRIPTION:
Adoption of the SSA® License Manager by SSA® BaanERP 5.0c required amongst others the creation and release of security files.

SOLUTION DESCRIPTION:
Security files have been created for SSA Baan ERP 5.0c and they are included in the current solution number.

SPECIAL INSTRUCTIONS:
Please install tools solution 208075 before installing the current
solution. Installation of the current solution will fail in case you don't have installed tools solution 208075.

PATH NAME IN DIAL-UP DIRECTORY/WEB SITE:
Below are the supported VRC's based on the Baan standard derivation structures. It is necessary to download and patch all links contained under the VRC in the order listed. The solutions may contain standard and localized components, which require multiple ftp links.

If your Current VRC is:

B50_b:
/ftpdownload/updates/B50_b/208077stnd

B50L_b_bgl0:
/ftpdownload/updates/B50_b/208077stnd
/ftpdownload/updates/B50L_b_bgl0/208077bgl0

B50L_b_jpn0:
/ftpdownload/updates/B50_b/208077stnd
/ftpdownload/updates/B50L_b_bgl0/208077bgl0
/ftpdownload/updates/B50L_b_jpn0/208077jpn0

B50L_b_bci1:
/ftpdownload/updates/B50_b/208077stnd

B50_c:
/ftpdownload/updates/B50_c/208077stnd
/ftpdownload/updates/B50_c/208077-1stnd
/ftpdownload/updates/B50_c/208077-2stnd

B50L_c_bgl0:
/ftpdownload/updates/B50_c/208077stnd
/ftpdownload/updates/B50_c/208077-1stnd
/ftpdownload/updates/B50_c/208077-2stnd
/ftpdownload/updates/B50L_c_bgl0/208077bgl0

B50L_c_jpn0:
/ftpdownload/updates/B50_c/208077stnd
/ftpdownload/updates/B50_c/208077-1stnd
/ftpdownload/updates/B50_c/208077-2stnd
/ftpdownload/updates/B50L_c_bgl0/208077bgl0
/ftpdownload/updates/B50L_c_jpn0/208077jpn0

B50L_c_eme0:
/ftpdownload/updates/B50_c/208077stnd
/ftpdownload/updates/B50_c/208077-1stnd
/ftpdownload/updates/B50_c/208077-2stnd
/ftpdownload/updates/B50L_c_bgl0/208077bgl0
/ftpdownload/updates/B50L_c_eme0/208077eme0

B51_a:
/ftpdownload/updates/B51_a/208077stnd
/ftpdownload/updates/B51_a/208077-1stnd

This is close to Any G's suggestion but the solution ids are different.

Yes you will need to downgrade the porting set, and then apply the SLM license as well as patches associated with the implementation of SLM.

There should be a detailed instructions on how to implement SLM and what patches are required.

Go back to Infor and request the steps needed to implement SLM.

Also Porting sets 8.x for Baan Vc doesn't support Multi-byte.

Thanks to every one, i have already one solution to this issue.
Implemented some instruction to my system and now it is ok

Kind Regards:)

Hy Every one

Here it is a gold solution for this Issue:
I you have installed batch install SP1-22 and now you can not execute any baan session, getting this error, so you can implement this solution:

1. Navigate to $BSE/lib/install and check if the tab.reg file is present. If it does not exist, put the attached tab.reg file in this folder. If it exists, then make a backup/copy of the current file and put one tab.reg file .

2. Navigate to $BSE/tools/tt7.1_a. Check if the ittbic folder is present. If not, create it manually and take care it gets the same permissions as the other folders 3. Put a ibic___slm___0 file in the folder created in step 2.
4. Navigate to $BSE/lib. Open and edit the fd file for the package combination in which you are working. E.g. the fd6.2.b50c file in case your current package combination was b50c. Check if a line is present for itt. If not, then add the following line:

itt:${BSE}/tools/tt7.1_a

Also for this step please first make a backup/copy of the file before you start changing it.

Then finally go do step 5:

5. In the "Directories of Software Components" (ttadv1115m000) session, check if the marked line is present of the second screenshot of the secfile2.doc document. If not, add this line.

This is the best solution we could have.

Thanks and good luck to your work

Lusia,

How could you manage to do step5?

ttadv1115m000

I am getting same error.

Hy Every one

Here it is a gold solution for this Issue:
I you have installed batch install SP1-22 and now you can not execute any baan session, getting this error, so you can implement this solution:

1. Navigate to $BSE/lib/install and check if the tab.reg file is present. If it does not exist, put the attached tab.reg file in this folder. If it exists, then make a backup/copy of the current file and put one tab.reg file .

2. Navigate to $BSE/tools/tt7.1_a. Check if the ittbic folder is present. If not, create it manually and take care it gets the same permissions as the other folders 3. Put a ibic___slm___0 file in the folder created in step 2.
4. Navigate to $BSE/lib. Open and edit the fd file for the package combination in which you are working. E.g. the fd6.2.b50c file in case your current package combination was b50c. Check if a line is present for itt. If not, then add the following line:

itt:${BSE}/tools/tt7.1_a

Also for this step please first make a backup/copy of the file before you start changing it.

Then finally go do step 5:

5. In the "Directories of Software Components" (ttadv1115m000) session, check if the marked line is present of the second screenshot of the secfile2.doc document. If not, add this line.

This is the best solution we could have.

Thanks and good luck to your work

nicely documented. We also landed up in similar issue with baan 5, after downgrading the porting set. I had the backup of the folders /files. I did not change any value in ttadv1115m000 since in my case it was specified as ${BSE}/application for Functions. I just picked up tab.reg which was missing.

Thanks for the detailed info though.

Log in to your infor365 account and See Solution 1043025
Addressing message "Checksum of Tools Security File doesn't match with Master Security File"

I documented the problem with security files and what options you have as an admin and gave a little explanation as to what happens or why this could happen. Prao, Andy's explanation is good and it still applies. Check out the solution and you will see why.

Hope it helps.

Regards,

Nestor.

I met this problem , and I tested Luisa solution, but not worked,
I also check the solution 1043025, but for me , I had a difficult, because this is a fresh installation, the old server not used SLM, so I could not get any relevant files from the others server.
now I ask Infor to help for it!